Fitting a new detector

Fitting a Detector Using a

Introduction

This section goes through the procedure for fitting a spectrum file created for a single detector using a script created after fitting another detector for the same event. In order to create single detector spectrum and SRM files, the SSW routine hsi_spectrum_sep_det_files.pro can be used.

Prerequisites for this Procedure

• A single detector spectrum and srm files for the detector to be fit. It should meet the following requirements:
  • Created over the same time period and energy range as the files for the detector already fit
  • Created with the same time bins and energy bins as the files for the detector already fit
• An OSPEX script and results file for the detector already fit