DIB-table-2014-Jan-08

Last updated 2014 Jan 8

 address	DIB table:	1	2	3	4	5	6	7	8	9
 0	General control 	0x0A	0x0A	0x0A	0x0A	0x0A	0x0A	0x0A	0x0A	0x0A
 1	global enables	        0x01    0x01 	0x01 	0x01 	0x01 	0x01 	0x01 	0x01 	0x01
 2	front enables	        0x29 	0x29 	0x29 	0x29 	0x29 	0x29 	0x29 	0x29 	0x29
 3	front decimation	0x00 	0x00 	0x00 	0x00 	0x00 	0x00 	0x00 	0x00 	0x00
 4	rear enables	        0x2D 	0x2D 	0x2D 	0x2D 	0x2D 	0x2D 	0x2D 	0x2D 	0x2D
 5	rear decimation	        0x85 	0x85 	0x85 	0x85 	0x85 	0x85 	0x85 	0x85 	0x85
 6	pulser frequency code	0x0B 	0x0B 	0x0B 	0x0B 	0x0B 	0x0B 	0x0B 	0x0B	0x0B
 7	front slow threshold	0x0C 	0x38 	0x0C 	0x0C 	0x0C 	0x0C 	0x0C 	0x0C 	0x0C
 8	front fast threshold	0x22 	0x80 	0x22 	0x50 	0x22 	0x50 	0x22 	0x22 	0x22
 9	rear slow threshold	0x30 	0x30 	0x30 	0x30 	0x30 	0x30 	0x30 	0x30 	0x30
 10	rear fast threshold	0x45 	0x45 	0x60 	0x55 	0x45 	0x60 	0x45 	0x45 	0x70
 11	12-bit pulser amplitude	0x00 	0xFF 	0x00 	0x00 	0x00 	0x00 	0x00 	0x00 	0x00

A note on converting threshold values to keV:

Very roughly, the standard threshold, 0x0C, represents a little under 3 keV. So 0x58 is roughly 88/12 * 3 = 22 keV. Probably a little lower. But in the end we want to calibrate this using flare data.

Old tables: DIB-table-2013-Feb-14, DIB-table-2013-Sep-30