DIB Table

Last updated 2015 Aug 10

 address DIB table:    	1	2	3	4	5	6	7	8	9
 0       General control       0x0A  0x0A  0x0A  0x0A  0x0A  0x0A  0x0A  0x0A  0x0A
 1       global enables 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
 2 front enables 0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29
 3 front decimation 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
 4 rear enables 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D
 5 rear decimation 0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85
 6 pulser frequency code 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B
 7 front slow threshold 0x0C 0x70 0x0C 0x70 0x0C 0x20 0x10 0x15 0x1A
 8 front fast threshold 0x40 0x60 0x40 0x90 0x2E 0xB0 0x40 0x50 0x60
 9 rear slow threshold 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30
 10 rear fast threshold 0x70 0x45 0x70 0x45 0x58 0xB0 0x70 0xFF 0xFF
 11 12‐bit pulser amplitude 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00

A note on converting front slow threshold values to keV:

Very roughly, the standard threshold, 0x0C, represents a little under 3 keV. Each step is ~0.2 keV, so 0x58 is roughly 3+(88-12)*0.2 = 18 keV. But in the end we want to calibrate this using flare data.

Old tables: DIB table 2015 August 5 DIB-table-2015-Jul-22,DIB-table-2015-Jul-08, DIB-table-2015-Jun-17, DIB-table-2015-May-27,DIB-table-2015-May-13,DIB-table-2015-Apr-15,DIB-table-2015-Apr-01,DIB-table-2015-Mar-04,DIB-table-2015-Jan-05, DIB-table-2014-Aug-13, DIB-table-2014-May-28, DIB-table-2014-May-20, DIB-table-2014-May-12,DIB-table-2013-Feb-14, DIB-table-2013-Sep-30, DIB-table-2014-Jan-08, DIB-table-2014-Jan-29, DIB-table-2014-Feb-27, DIB-table-2014-Mar-11, DIB-table-2014-Apr-07, DIB-table-2014-Apr-11, DIB-table-2014-Apr-15, DIB-table-2014-Jun-11